Before one achieves the best custom gun painting, you must first choose the gun that you will be working on. There are way too many of them and it is important that you chose the gun of your likes. After all, not all of them will look good when they are painted. If you do not know which one to use, then it is better to ask the assistant in the shop.
Do not forget that it is very important that you have drawn a plan for the process. This must have guidelines that you will follow when you started the process. However, you must decide on these parts that you will spray with colors. Include that on your plan so you have something to look over.
It is very necessary to ensure that you will buy the colors that will fit to the design that you have established or made. The paints that you will be buying are ought to be sprays. And make sure they are all flat, all the colors you get. Or the shiny ones will make the item pretty darn wrecked.
It is very important that you provided a place where you will start the process. As much as possible you will need an open area for this. Not too windy and not too sunny. Or they will just dry the paint easily without you finishing the coating first. And when you use table, cover it with newspaper.
You now have to leave the parts that you will be spraying paint to, bare. But to the other parts that you will not be spraying hues, then it is better covered with the masking tape. You shall not begin spraying if you did not cover it including the inside of the muzzle. Or you will just clog the part up.
And the barrel has to be plugged. You can take a tissue and the roll it over. Insert it in the barrel and then you will protect it against the colors that could clog it. It is way too dangerous if you do not cover it with tissue papers. And make sure that you have no battery, mag and other items inside it.
Do not forget that it is very important that you removed the bullets before you started the covering and all. They are too dangerous and they could kill a person. And when you are hiding it, keep this out of sign as well as out of reach. Most especially when you have kids.
After that, you may now begin spraying the paint all over, depending on designs you got. You may start with the lighter ones and then venture into the darker ones. You have to repeat the process again and again until you have achieved the design. Leave it so it will dry up.
And after drying this thing up, it is now the time for you to remove all the tapes in custom gun painting that you have covered in the parts you do not want to be coated with the so called paints. You can remove it through holding the weapon down so that the coating will not drip inside the weapon. And after that, you can now use it in your work or your ammo practice.
Do not forget that it is very important that you have drawn a plan for the process. This must have guidelines that you will follow when you started the process. However, you must decide on these parts that you will spray with colors. Include that on your plan so you have something to look over.
It is very necessary to ensure that you will buy the colors that will fit to the design that you have established or made. The paints that you will be buying are ought to be sprays. And make sure they are all flat, all the colors you get. Or the shiny ones will make the item pretty darn wrecked.
It is very important that you provided a place where you will start the process. As much as possible you will need an open area for this. Not too windy and not too sunny. Or they will just dry the paint easily without you finishing the coating first. And when you use table, cover it with newspaper.
You now have to leave the parts that you will be spraying paint to, bare. But to the other parts that you will not be spraying hues, then it is better covered with the masking tape. You shall not begin spraying if you did not cover it including the inside of the muzzle. Or you will just clog the part up.
And the barrel has to be plugged. You can take a tissue and the roll it over. Insert it in the barrel and then you will protect it against the colors that could clog it. It is way too dangerous if you do not cover it with tissue papers. And make sure that you have no battery, mag and other items inside it.
Do not forget that it is very important that you removed the bullets before you started the covering and all. They are too dangerous and they could kill a person. And when you are hiding it, keep this out of sign as well as out of reach. Most especially when you have kids.
After that, you may now begin spraying the paint all over, depending on designs you got. You may start with the lighter ones and then venture into the darker ones. You have to repeat the process again and again until you have achieved the design. Leave it so it will dry up.
And after drying this thing up, it is now the time for you to remove all the tapes in custom gun painting that you have covered in the parts you do not want to be coated with the so called paints. You can remove it through holding the weapon down so that the coating will not drip inside the weapon. And after that, you can now use it in your work or your ammo practice.
No comments:
Post a Comment